haier HWM50TLF - Manual (Page 12)

Lint Filter
The lint filter mustbe usedduring washing.
It mustbe cleanedin timeafter eachusing.
1. Take off the lint filter.
Pull up the lint filter from the agitator.
2. Remove lint
Press the lint screenclip with your thumband index finger, and get the screen
downward as shown in figure below. While wet, removethe lint from the screen.
3. Install the lint filter
After cleaning,install the screenbackonto the lint filter. Then put the lint filter
backin the agitator barrel.
Safety Lid Switch
If for any reason you openthe lid in the middleof the wash cycle,the
washer will not spin and will shut off automatically
. Oncethe lid is
closed,the washer will start backon.
Figure 3
Agitator
Press
Lint filter
Lint Screen
Figure
Figure 2
Pull up out
Press
11