haier HWM50TLF - Manual (Page 9)

are desired, press the ProcessSelectbuttonto choose.
Note: Spin shall beginafter sometimeevenif there is no water in the tub. Do not
use soak processfor woolen clothes.Clothesprone to fading should be
washedseparately.
4. Water Level Selection
After W ash Cycleselectionpress the Water Level buttonto selectthe proper water
level for wash.
Note: See chart below for LoadSize selection.
The Capacityof
W ater W ater
Washing (kg.)
Level Quantity
4.5~6.5 Large About 55L
2.0~4.5 Medium About 44L
Below 2.0 Small About 35L
5.Temp of Wash and Rinse Water Selection
Initial setting is W ar m/Cold when washer is poweredon. Press buttonto change
selectionbasedon clothesput in the washer.
6. Delay Start
To start the washer at a later lime press the Delay Start buttonand set the time.
When activatedthe indicator displays 2. Push buttononcefor every 1 hour delay
for up to 24 hours
Press Start buttonto activateDelay Start.
When the delay timer starts the programselectindicator turns off. The indicator
will display the remainingtimeto turn on the unit. In the lower right corner of the
display, a blinking light will indicatethat Delay Start has beenactivated.
By pressing the Delay/Star t buttonthe selectedProcessprogramswill be
displayed.
By altering the running program,the washer will haveto be reset.
7. Start/Pause
Press this buttonwhen you want the machineto start.
During operationpress this buttonto pauseand press it again to resumeopera-
tion.
Note: By openingthe top lid will stop the machineexceptfor water filling or
draining.
8