haier HWM50TLF - Manual (Page 8)

Quick Cycle
Quick washing of the light dirt laundries only 25 minutes
Gentle Cycle
Washing the woollen textile or underwear
PROCESS Button:(5)
This is to selectwashing process.
Soak will not work in Quick cycles.
W ater level indicator will shut off if only Spin is selected.
WATER LEVEL Button:(6)
W ater levels may be set at the beginningof the wash or at pause.
During Soak, W ash or Rinse press this buttonto manually
replenish water. Release to stop.
Functionautomaticallyis inactivewhen water reachesthe overflow
Protection level.
TEMP SELECT Button:(7)
Initial setting is W ar m/Cold when washer is poweredon.
Press buttonto changeselectionbasedon clothesput
in the washer.
To selectinlet water temperaturefor wash and rinse.
Operating Procedure
1. Press power on button.
The washer will now be in the working status in the Nor mal cycle.
If the Start/Pause buttonis not pressedwithin 5 minutesafter powering on the unit
it will automaticallyswitch off and return to the stand by mode.
The washer will also return to the stand by modeimmediatelyafter completionof
the wash process.
Regardlessof the settingsby pressing the power on/of f buttonall programswill
stop and return to the stand by mode.
2. Selectionof Cycles
When the washer is poweredon the Nor mal cycleis the defaultcycle.If other
cycleis required press the cyclebuttonfor desired program.
3. ProcessSelect
Oncethe power is switchedon the washing machinewill automaticallyset the
Nor mal cyclewhich will W ash, Rinse and Spin. If other selectioncombinations
7
SOAK
WASH
RINSE
SPIN
PROCESS
LARGE
MEDIUM
SMALL
WATER
LEVEL
WARM
COLD
TEMP
SELECT
HOT