Troubleshooting – haier HWM50TLF User Manual

Page 15

Advertising
background image

W asher does not operate:

Checkif unit is pluggedin. The plug may havecomeloose.

Checkif the electricalwall receptacleis of proper voltage.

Checkif the circuit breaker needsto be reset or if the fuse
needsto be replaced.

Checkif the washer is overloaded:load may needto be
re-balancedand clothesmay needto be redistributed.

Checkif the lid is open.You may haveto closethe lid properly.

The washer pausesin somecycles.This is normal in delicateor
hand-washablecycle,which has short soak period where your clothes
are being soakedfor very short period of time.You will not hear washer
operationfor a short period of time.When the soak timeis over,
it will start automatically

.

Pr oblems with water:

Not enoughwater comingout: W ater faucetmay needto be turnedon
fully. W ater hosesmay be tangledup or wrinkled up. Straighten up
hoses. Checkwater level selection,it may needto be readjusted.

W ater Temperatureis incorrect:Checkyour water heatertemperature.
Hot water needsto be at a temperatureat least 120 F

. -140 F

(49 C 60 C.).Checkto makesure the inlet hosesare properly
connected.

(e.g. hot to hot & coldto cold)

W ater leaks: This is dueto not properly installing drain hose or fill
hoses. Your homedrain may be cloggedor having constant
water pressure. You may needto tightenhoses, checkthe
plumbingor call a plumber.

W ater will not drain: This is dueto not installing your drain hose
properly. You may needto connectthe drain hose properly. Checkthe
position of the drain hose. In order to drain properly, makesure that top
of drain outletis less than 4 ft. (1.2 m) abovethe floor.

Troubleshooting

14

Advertising