HP 600 - Manual (Page 28)

20 HP Fax basics
Speed dialing
For example, to enter ‘+123 456 7890’ follow these steps.
Speed dialing
Your HP Fax has a built-in phone book that allows you to enter up to 100 names
and numbers for faxing or telephone use. Once entered, you can dial the
number by any of these methods.
• One-Touch (first 10 numbers)
• Searching the phone book through the Speed Dial button
All numbers must be stored in the phone book before use.
Store a number in the phone book
Once in the phone book these numbers can be dialed using one touch buttons,
or by searching the phone book through the Speed Dial button.
1. Press Speed Dial button repeatedly until New & Edit appears and press OK.
The display shows Speed [00-99]>##.
2. Enter a two-digit number and press OK.
Numbers from 00 to 09 will be used for One-Touch dialing.
3. Enter the telephone/fax number you want to store (up to 40 digits) and press
OK.
• If you want a pause between numbers (for example, when entering an
access code where you need to wait for a second dial tone), press
Redial/Pause. A P appears in the display. For a longer pause, simply
press Redial/Pause again.
Press Result
*
‘+‘
will display.
n , o , p
‘123’
will display.
# Enters a space.
q
,
r
,
s
‘456’
will display.
# Enters a space.
‘
t , u , v , m
‘7890’
will display.