HP 600 - Manual (Page 35)

27 Additional features
3
Additional features
This chapter contains information on additional features you may want to set or
change for your HP Fax.
• Rings to answer: Sets the number of rings before the HP Fax answers the
phone.
• Caller ID: If you subscribe to Caller ID through your local phone company,
you can use it with your HP Fax.
• Block Junk Faxes: In conjunction with Caller ID, you can block certain
numbers from sending you a fax.
• Favorites
• Image TCR
• Distinctive Ring
• Answer/Receive mode: Determines how the HP Fax responds to incoming
calls.
Set rings to answer
You can select the number of rings that will occur before the fax answers an
incoming call.
NOTE: If you are using your machine as both a telephone and a fax machine,
we suggest you set the ring count to at least 4 to give you time to answer.
1. Press Menu repeatedly until BASIC FAX displays and press OK.
2. Press
 until Rings to Answer displays and press OK.
3. Enter the number of rings you want (2–7) and press OK.
1 The “arrow buttons” located at the left
and right of OK button on the control
panel are designated by  in the
instructions.
1