Document Outline

• Conquest User Manual
• Copyright
• Contents
• Conquest Versions
  • Conquest M2 versus Conquest
  • Common Software
    • Conquest M2 (SBAE30) and Conquest Supported Features
• Introduction
  • Overview
    • Analyzing USB Designs With the Analyzer
    • Conquest M2 Options
      • Host Exerciser
      • Device Emulation
      • OTG Exerciser
      • DC Compliance measurement
      • Timing Analyzer
  • Conquest M2 Interface
    • Status LED Function Description
    • Manual Trigger
    • External Signals (Ext. Out, Ext. Trig In, and Ext. Clk)
    • Ports
    • Power In
    • Analyzer/Exerciser Connection Identification
• Receiving the Analyzer
  • Conquest M2
  • Conquest
  • Unpacking the Analyzer
• Installing the Analyzer
  • Hardware Setup
    • Exerciser Configuration Connections
    • OTG Analysis Connections
    • OTG Exerciser as DRD A-Device Connections
    • OTG Exerciser as DRD or Peripheral Only B-Device Connections
    • Device Emulation Connections
    • Conquest Analyzer Connections
    • Conquest Exerciser Connections
    • Conquest M2 External I/O Connector Pin Assignment
    • Conquest External I/O Connector Pin Assignment
  • Software Installation
    • Manual USB Driver Installation
    • Updating the Conquest USB Driver Manually
    • Directory Structure on Windows XP and Vista
    • Windows XP
    • Windows Vista
• Launching the USB Analyzer
  • Connecting via Ethernet
    • Connecting to a Network
    • Connecting via Hub, Switch or Similar device
  • Operating in Simulation Mode
  • Authorization
  • Example Projects
    • Project File Types
    • Run an Example Project
  • Default Capture
  • Creating Projects
    • Capture and Timing Analysis Projects
    • Performance Analysis Projects
    • Device Emulation & OTG Advanced Exerciser
    • Current and Voltage Measurements
• Protocol Analysis
  • Easy Mode (Pre-Defined Setups)
    • Easy Data Capture
      • Trigger on Data
    • Data Capture Options
    • Custom Transaction
  • Exercise and Capture (Optional)
    • Programming the Exerciser in Easy Mode
    • Settings
      • Auxiliary Port
  • Advanced Mode (User-Defined)
    • Capture Data Project
      • Defining Packets
      • Packet Payload Data
    • The Sequencer
      • Sequencer Operation Overview
      • Programming the Sequencer
    • Protocol Errors
      • Setting a Protocol Error Mask
  • Host Exerciser (Optional)
    • Programming the Exerciser In Advanced Mode
    • Programming with Transfers
      • Specifying a New Class
      • Specifying Data for Transfer
    • Reduced Bit Width
    • Exerciser Programming Shortcuts
      • Creating an Exerciser Program by Importing
      • Advanced Refresh
      • Creating an Exerciser Program by Copying and Pasting
    • Creating a Data Block
      • Naming a Data Block
      • Creating and Editing Data Blocks as Text
    • Settings
    • Running the Project
    • Set Data Capture Options
    • Run Project
    • Reports
      • View Statistical Report
      • View Data Report
      • View Data Report Statistics
      • Display Histogram
      • Search a Data Report for a Pattern
    • High Level Interpretation Assignment
      • User-Defined Decodes
  • Protocol Errors
    • Protocol Errors Detected While Capturing Data
    • Protocol Errors Detected Post-Process
  • Pre-Trigger
• Performance Analysis
  • Performance Analysis (Easy Mode)
  • Performance Analysis (Advanced Mode)
    • Real Time Analysis
    • Perform a Pre-defined Analysis
    • Create a New Analysis
      • Define Packets
      • Program The Exerciser
      • Creating Analysis Expressions
    • Saved Performance Analysis Review
• Timing Analysis (Optional)
  • Easy Mode Timing Analysis
  • Advanced Mode Timing Analysis
• Device Emulation (Optional)
  • Device Emulation (Easy Mode)
    • Programming the Device
      • Endpoint Errors Generated by OTG DRD & Device Emulation
  • Device Emulation (Advanced Mode)
    • Test Mode
    • Programming the Device
• OTG Exerciser (Optional)
  • OTG Exerciser as an A-Device
    • Programming the Device
    • Create Exerciser Program
    • Define OTG Device Configuration
    • Starting a Session
    • Dropping a Session
  • OTG Exerciser as a Peripheral B-Device
    • Define OTG Device Configuration
    • Create Exerciser Program
    • Requesting a Session
    • Terminating the Exerciser Program
    • Host Negotiation Protocol (HNP)
    • Session Request Protocol (SRP)
    • How to Turn Off the VBUS (in an OTG Script)
    • How Long Does Conquest Take to Drop D+ Pull-up?
• Current Measurement (Optional)
  • Unconfigured Current Measurement
  • Operating Current Measurement
    • Making the VBus Measurement
    • VBus Droop Measurement
    • Inrush Current Measurement
      • Inrush Current Display Features
    • Suspend Current Measurement
    • Current Measurement Calibration Board
• Display Manipulation
  • Results Display Viewing Preferences
    • Compact View
    • Display Idle Time
    • Waveform Display
  • Filter
  • Smart on Screen Filtering
  • Save Display Settings
  • Timing Analysis Display
    • Set Timing Display Viewing Options
    • View Timing Details
  • Using the Cursors and Bookmarks
  • Search
  • Display Configuration
• Mnemonics
• Utilities
  • Self Test
  • View Scan Descriptors
  • Attach/Detach Device
  • Capture Screen
• Appendix A
  • Advanced Script Language (ASL)
    • Document Conventions
    • Language Elements
    • ASL Script Structure
    • Protocol Extraction Section
    • Protocol Decoding Section
    • USB Descriptor Section
    • Functions
  • Samples
  • Script Editor
    • Creating the Script
    • China Restriction of Hazardous Substances Table
• Index