Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 41)

Launching the USB Analyzer
31
Performance Analysis Projects
Check a Performance Analyzer, Exerciser option and click the
Create Project button to display the corresponding project setup dialog.
See page 109 for setup of an Easy Mode Performance Analysis.
See page 112 for setup of an Advanced Mode Performance Analysis.
Device Emulation & OTG Advanced Exerciser
Check the Emulation to use to open the corresponding project setup dialog.
See page 130 for setup of an Easy Mode Device Emulation.
See page 138 for setup of an Advanced Mode Device Emulation.
See page 145 for setup of the OTG Advanced Exerciser.
Current and Voltage Measurements
Check a measurement type to start the measurement.
See page 165 to perform an Inrush Current measurement.
See page 156 to perform an Unconfigured Current measurement.
See page 170 to perform an Suspend Current measurement.
See page 158 to perform an Operating Current measurement.
See page 161 to perform a VBus measurement.
See page 163 to perform a VBus droop measurement.