Teledyne LeCroy Conquest User Manual - Users Manual User Manual
Page 100
Protocol Analysis
90
Walking Bit Pattern
To use a walking bit pattern, click the Generate button. Choose a walking bit
of “0” or “1”, the walk direction, the start position, and the number of times to
repeat the pattern.
Figure 66 Define a Walking Bit Pattern
Sample Data Block
Figure 67 illustrates a data block with a defined pattern AA starting at
address 0 and repeated four times, followed by a random pattern starting at
address 4 and repeated four times, then a left-to-right walking 0 pattern
starting at address 8 and repeated six times.
Figure 67 Sample Data Block Definition
Close & Save
When you have completed a data block definition, click the Close&Save
button to save the newly created data block.
The saved data block automatically is assigned a sequentially numbered
(DataBlock##) title. To rename for easier identification later, see “Naming a
Data Block” on page 87.