Teledyne LeCroy Conquest User Manual - Users Manual User Manual
Page 79
Advertising
Protocol Analysis
69
Add a Control Transfer(s)
To add a control transfer line, click the Add/Insert Transfer button and choose
Control from the drop-down list.
Figure 41 Adding a Control Transfer in High Speed Protocol
Control Transfers
Control Transfers transfer specific requests and commands to a Standard,
Class or Vendor Device, Interface or Endpoint. Other user-defined setups are
available. The most commonly used is the selection of a request or command
for a Standard Device. These selections are made on the inserted Transfer
line. See Figure 44.
Advertising