Unconfigured current measurement – Teledyne LeCroy Conquest User Manual - Users Manual User Manual
Page 166
Advertising
Current Measurement (Optional)
156
Unconfigured Current Measurement
The Unconfigured current measurement requires the interaction of the
exerciser to place the Device in the unconfigured state. Prior to making the
measurement you must connect the external cable provided between the USB
2.0/1.x Analyzer Host connector and the Exerciser Port. See Figure 113 on
page 155.
Click the
black current measurement button in the
Current & Voltage Measurements project selector to open the
Unconfigured Current dialog.
Figure 114 Unconfigured Current Measurement Dialog
To display the unconfigured current as a function of time, check the
Show Chart check box.
Click Start. After a brief time, the following message appears:
Connect, then click OK.
Advertising