Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 47)

Protocol Analysis
37
Trigger on a Data Packet
This is the default setting when trigger on Data is selected.
Figure 15 Trigger on a Data Packet Dialog
Choose Packet Type
Click the down arrow next to the Type list box and select a packet type on
which to trigger.
Trigger on a Data Pattern
To trigger on a data pattern, check the Pattern button. A pattern can be across
up to eight similar transaction types by checking the Multiple Transaction
check box.
Figure 16 Trigger on Data Pattern Dialog
Click the down arrow next to the Data Pattern list box, then select a
pre-defined pattern or enter a pattern directly in the list box (eight bytes
maximum).