Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 201)

Display Manipulation
191
Search for Data Pattern
Choose Data Pattern, choose the data format, enter the data pattern for which
to search, and click OK. You can also search for data packets of payload
length jointly or independently of the data pattern.
Note: A data pattern is found only if it is within a data packet boundary. However, if
the data is in multiple Data packets, perform the search in the Data Report, as
described on page 99.
Search with a Mnemonic
In order to perform a search using a Mnemonic, you must first define a
Mnemonic as described in “Mnemonics” on page 197. Once Mnemonics are
defined proceed similarly as for searching for Protocol Errors.