Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 111)

Protocol Analysis
101
High Level Interpretation Assignment
High level interpretation assignment is a results analysis tool that allows
decode and identification of upper level protocols used by a known device.
Standard requests are interpreted automatically. However, Class requests
require assignment of an appropriate protocol.
To assign a protocol for a High Level interpretation in an open results window,
click the NCX HLD button on the main toolbar to open the High Level
Interpretation Assignment dialog.
Figure 79 Upper Level Interpretation Assignment Dialog
The global Upper Level Interpretation dialog opens with all of the active
Devices and endpoints identified.
To assign a protocol for the device you are testing:
1. Highlight an endpoint.
2. Choose a protocol appropriate for that endpoint in the Modifiable
Protocols list box.
3. Click the Add to Assigned List button.
4. Repeat for all endpoints and click OK.
5. Click the Show/Hide Non Control Transfers button to toggle
the display.
Note: To Show/Hide Non Control Transfers, check the NCX box.
NCX check box