Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 74)

Protocol Analysis
64
3. Choose the next state by clicking the blue State1 to display the available
states, then choose the next state.
4. Conquest starts capturing all bus activity at start by default. To delay the
start of capture until some occurrence, click the blue While button to
toggle it to Stop.
5. Define the operation of each additional state similarly.
6. If you are testing for receipt of an expected packet, such as Data or
Handshake, select Timeout. This is equivalent to a
Truncated Transaction protocol error, PE 14.
7. By clicking the ellipses after If “Packet” Occurs”...” and choosing either
Tag_Event or Discard, you can identify a block of data to discard.
Setting Tag_Event tags the start of a data discard. Setting Discard
designates the point up to which to discard the data. Discarded data is
between the last Tag_Event set and the Discard set.