Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 98)

Protocol Analysis
88
Define Your Own Pattern
To define a pattern:
1. Click the Generate button and choose Pattern to open the
Define Pattern dialog box, as shown in Figure 63
2. Enter a data pattern in the Data Pattern edit box.
3. Choose the number of times to repeat that pattern and click OK.
Figure 63 Define Your Own Data Pattern
Address
The cell address starts at 0 for the first data entry and automatically
increments to the next available address as data is written. You can set it back
to a previously defined address to modify its content or insert additional data at
that point.
Insert/Overwrite Data
To define if the data in a previously defined cell is overwritten or new data is
inserted after that cell, click the Insert/Overwrite button to toggle to an
operation.