Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 96)

Protocol Analysis
86
Creating a Data Block
You can create the following four types of data blocks for use wherever data
fields are used:
•
Custom data pattern specifically for your application
• Random data pattern
• Counter
• Walking “1” or “0” pattern.
1. To create a data block, click the Default Data Block button on
the Main toolbar to open the Data Block dialog box, as shown in
Figure 60.
Figure 60 Default Data Block Dialog Box
2. To add another data block, click the New button in the Data Block dialog
box.
Figure 61 New Data Block Dialog Box
3. Choose the number of data columns (up to 16 Data Cells/Row) and the
Cell length (up to 16 Bytes/Cell). This is a display function only.
4. Click either the Bin or Hex button to choose a number format.