Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 152)

Device Emulation (Optional)
142
9. You can define additional command sets by repeating the above steps.
Note To make the just defined Project the Default Project, click the Save button on
the main toolbar. To leave a previously defined Default Project intact, click File
on the main toolbar and choose Save As to save the project with a new name.
Data Toggle Selection
1. To handle HS traffic as described in the USB 2.0 spec ification, select
Manual Toggle.
2. For Packet Type, select Data0, Data1, Data2, or MData. If USB Host
starts a transaction, Device Emulation can respond within one
microframe.