Hayes Microcomputer Products RCV56HCF - Manual (Page 40)

RCV56HCF PCI/CardBus Modem Designer’s Guide
ROCKWELL PROPRIETARY INFORMATION 1129 3-18
3.2 ELECTRICAL,SWITCHING,AND ENVIRONMENTAL CHARACTERISTICS
3.2.1 Power and Maximum Ratings
The current and power requirements are listed in Table 3-5.
The absolute maximum ratings are listed in Table 3-6.
Table 3-5. Current and Power Requirements
Current Power
Mode
Typical
Current (mA)
Maximum
Current (mA)
Typical
Power (mW)
Maximum
Power (mW) Notes
Bus Interface (11229) fIN = 28.224 MHz
Operating 145 186 479 670
Modem Data Pump (R6776) fIN = 28.224 MHz
Operating 58 68 191 245
Sleep 1.8 — 5.9 —
Total
MDP Operating 203 254 670 915
MDP Sleep 147 — 485 —
Notes:
Operating voltage: VDD = 3.3V ± 0.3V.
Test conditions: VDD = 3.3 VDC for typical values; VDD = 3.6 VDC for maximum values.
Table 3-6. Maximum Ratings
Parameter Symbol Limits Units
Supply Voltage V
DD
-0.5 to +4.6 V
Input Voltage V
IN
-0.5 to (VCC +0.5) V
Operating Temperature Range T
A
-0 to +70 °C
Storage Temperature Range T
STG
-55 to +125 °C
Analog Inputs V
IN
-0.3 to (VAA+ 0.3) V
Voltage Applied to Outputs in High Impedance (Off) State V
HZ
-0.5 to (VCC + 0.5) V
DC Input Clamp Current I
IK
±20 mA
DC Output Clamp Current I
OK
±20 mA
Static Discharge Voltage (25°C) V
ESD
±2500 V
Latch-up Current (25°C) I
TRIG
±400 mA