2. process/polarity table, 3. changing polarity – Hobart Welding Products OM-947 User Manual
Page 17
Advertising
OM-947 Page 13
4-2. Process/Polarity Table
Process
Polarity
Cable Connections
Cable To Gun
Cable To Work Clamp
FCAW − Self-shielding wire −
no shielding gas
DCEN − Straight Polarity
Connect to negative (−)
output terminal
Connect to positive (+) output
terminal
GMAW* − Solid wire with
shielding gas
DCEP − Reverse polarity
Connect to positive (+) out-
put terminal
Connect to negative (−) output
terminal
* Unit must have MIG conversion kit 195 158 installed.
4-3. Changing Polarity
1
Lead Connections For Direct
Current Electrode Negative
(DCEN)
2
Lead Connections For Direct
Current Electrode Positive
(DCEP)
Always read and follow wire
manufacturer’s recommended po-
larity, and see Section 4-2.
Close door.
Ref. 210 428
1
2
Advertising