5. installing wire spool and adjusting hub tension – Hobart Welding Products OM-947 User Manual
Page 19
Advertising
OM-947 Page 15
4-5. Installing Wire Spool And Adjusting Hub Tension
When a slight force is needed
to turn spool, tension is set.
1/2 in
Tools Needed:
Ref. 802 971-C / 803 012 / 803 013 -B
Installing 8 in (203 mm) Wire Spool
Installing 4 in (102 mm) Wire Spool
When a slight force is needed
to turn spool, tension is set.
Retaining ring used
with 8 in (203 mm)
spool only.
Adapter used with
8 in (203 mm)
spool only.
.
Only applies to units equipped with
optional hub kit.
Advertising