Step 3 - assembling the fan – Hunter Fan Hunter Ceiling Fans 41462-01 User Manual
Page 10

10
41462-01 10/14/2005
®
STEP 3 - ASSEMBLING THE FAN
STEP 3 - ASSEMBLING THE FAN
STEP 3 - ASSEMBLING THE FAN
STEP 3 - ASSEMBLING THE FAN
STEP 3 - ASSEMBLING THE FAN
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
The pipe has a special coating
on the threads. Do not remove
this coating; the coating pre-
vents the pipe from unscrew-
ing. Once assembled, do not re-
move the pipe.
1. Insert the pipe through the hanger
bracket and canopy as shown in
Figure 3a. Feed wires from the fan
through the pipe.
2. Screw pipe into fan assembly un-
til tight. IMPORTANT! Tighten
allen head pipe set screw as shown
in Figure 3 with the included allen
wrench.
Figure 3 - Inserting Pipe through
Figure 3 - Inserting Pipe through
Figure 3 - Inserting Pipe through
Figure 3 - Inserting Pipe through
Figure 3 - Inserting Pipe through
Hanger Bracket and Canopy
Hanger Bracket and Canopy
Hanger Bracket and Canopy
Hanger Bracket and Canopy
Hanger Bracket and Canopy
Pipe
Canopy
Allen
Head
Pipe Set
Screw
Hanger
Bracket