Hunter Fan Hunter Ceiling Fans 41462-01 - Manual (Page 5)

5
41462-01 10/14/2005
®
IMPOR IMPOR IMPOR IMPOR IMPORT T T T TANT INFORMA ANT INFORMA ANT INFORMA ANT INFORMA ANT INFORMATION TION TION TION TION
let box and associated wall
switch location. If you can-
not lock the circuit breakers
in the off position, securely
fasten a prominent warning
device, such as a tag, to the
service panel.
• All wiring must be in accor-
dance with national and lo-
cal electrical codes and
ANSI/NFPA 70. If you are
unfamiliar with wiring, you
should use a qualified elec-
trician.
• To reduce the risk of per-
sonal injury, do not bend
the blade attachment sys-
tem when installing, bal-
ancing, or cleaning the fan.
Never insert foreign objects
between rotating fan
blades.
DO YOU NEED HELP? DO YOU NEED HELP? DO YOU NEED HELP? DO YOU NEED HELP? DO YOU NEED HELP?
To install a ceiling fan, be sure you
can do the following:
• Locate ceiling joist or other suit-
able support in ceiling.
• Drill holes for and install wood
screws.
• Identify and connect electrical
wires.
• Lift 40 pounds.
If you need help installing the fan,
your Hunter fan dealer can direct you
to a licensed installer or electrician.
• To reduce the risk of fire,
electrical shock, or motor
damage, do not use a solid-
state speed control with this
fan. Use only Hunter speed
controls.
WARNINGS WARNINGS WARNINGS WARNINGS WARNINGS
• To avoid possible electrical
shock, before installing
your fan, disconnect the
power by turning off the
circuit breakers to the out-
CAUTIONS CAUTIONS CAUTIONS CAUTIONS CAUTIONS
• Read entire booklet care-
fully before beginning in-
stallation and save these
instructions.
• To reduce the risk of per-
sonal injury, attach the fan
directly to the support
structure of the building ac-
cording to these instruc-
tions, and use only the
hardware supplied.
• Do not hang fan on ceilings
that have a height less than
9 feet.