Hague Quality Water Intl WATERMAX 60 SERIES - Manual (Page 24)

WaterMax 60 Series Owner’s Manual 11/10/2008 24
61AAN WaterMax
®
Iron Filter Sizing Formula
The
WaterMax
® Iron Filter may be programmed to regenerate every one to twelve days. Select the frequency
based on the amount of iron in the water and the number of people in the household.
For optimum
performance, program the water softener to regenerate first, followed by the Iron Filter.
Example: Softener 1:00 am; Iron Filter 3:00 am. See the 61AAN WaterMax
® Iron Filter Sizing Formula.
Regeneration Cycle Frequency Worksheet
This table will help you determine how often the iron filter will need to regenerate.
Water Example
Total Iron ____ ppm x 1 = ____ ppm 3.5 ppm x 1 = 3.5 ppm
+ Manganese* ____ ppm x 3 = ____ ppm 0.2 ppm x 3 = 0.6 ppm
+ Sulfur ____ ppm x 5 = ____ ppm 1.0 ppm x 5 = 5.0 ppm
= Total compensated ppm ____ ppm 9.1 ppm
x Gallons per day for one
person 75 gal 75 gal
= ppm per person per day = ____ ppm 682.5 ppm
x Number of people in household ____ people 4 people
= Daily ppm capacity ____ ppm 2730 ppm
Iron filter capacity = 10,000 ppm 10,000 ppm
÷ Daily ppm requirements = ____ ppm 2730 ppm
= Frequency of regeneration ____ days 3.6 days
Set regeneration frequency @ ____ days 3 days
*If manganese is unknown, multiply the iron and sulfur total by 1.15 to adjust total compensated ppm.
Determine Monthly Usage
This table will help you determine how much regenerant the iron filter will use each month.
Water Example
Total days per month ____ days 30 days
÷ Frequency of regeneration ____ days 3 days
= Regenerations per month ____ regenerations 10 regenerations
x 4 oz per regeneration = oz KMnO
4
per month ____ oz 4 oz x 10 regenerations
= 40 oz
÷ 16 = lb per month ____ lb 40 oz ÷ 16 oz/lb
= 2.5 lb
Notes: