Hague Quality Water Intl WATERMAX 60 SERIES - Manual (Page 40)

WaterMax 60 Series Owner’s Manual 11/10/2008 40
Assembly and Parts, Cont.
Safety Shutoff Valve Elbow Installation
Figure 18: Safety Shutoff Valve Elbow Installation
Part # Description Quantity
1 54112 1/2" Compression Assembly 1
2 54138 3/8" Compression Assembly 1
The nut, gripper, and retainer sleeve are a three-piece assembly that can come apart if removed from the elbow
body. Parts must be reassembled exactly as shown to function properly.
When connecting the 3/8" poly tube, first assemble the nut, gripper, and retainer sleeve on the tubing. Then
insert the plastic insert. Screw the nut on the elbow body. With a wrench, tighten the nut securely to create a
water-tight connection.
3/8" Poly Tube
3/8" Nut
3/8" Plastic Gripper
3/8" Retainer Sleeve
3/8" Plastic Insert
2
Safety Shutoff Valve
Hex Nut
1
1/2" Retainer Sleeve
1/2" Plastic Gripper
1/2" Nut
Air Check/Draw Tube
Wrist Pin