Hollywood VR-652 - Manual (Page 31)

ENGLISH
31
Continued
2.
Press the CURSOR / buttons to select the desired file, then press the DISPLAY button to enter the
program mode.
• Then the program menu is
displayed.
• Each time the DISPLAY button is
pressed, the program mode is
canceled or the program menu is
displayed.
3.
Press the CURSOR / buttons to select ADD TO PLT, then press the ENTER button.
4.
Repeat the above steps 1~ 3 until the desired files are programmed.
5.
Press the PROGRAM button to display PROGRAM LIST, then press the ENTER button or the PLAY/PAUSE
( ) button.
• Then the selected file is
programmed.
When selecting PROPERTIES in the program menu.
• Then the information on the selected file such as file size, recording conditions, etc. is displayed.
• To turn off the information, press the ENTER button.
When selecting CANCEL
• Then the program mode is canceled.
• Then the files are played back in the programmed order.
• After all the programmed files have been played back, it enters the stop mode and the PROGRAM LIST is still displayed.
• Each time the PROGRAM button is pressed, the PROGRAM LIST is displayed or not.
In this case, even when the PROGRAM LIST disappears, the programmed files are not cleared.