Operation of tuner – Hollywood VR-652 User Manual
Page 46
ENGLISH
46
LISTENING TO RADIO BROADCASTS
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and "TUNED" indicator lights up.
• If the station found is not the desired one, simply repeat
this operation.
• Weak stations are skipped during auto tuning.
Operation of Tuner
Auto tuning
Manual tuning
1.
Select the tuner.
After selecting the tuner and the desired band, press the TUNING UP/DOWN ( /
) buttons repeatedly until the
right frequency has been reached.
3.
Press the TUNING UP/DOWN(
/
) buttons for more than 0.5 second.
2.
Select the desired band.
• Each time the FM/AM button on the remote control is
pressed, the band changes as follows :
"F" (FM)
"A" (AM)
• Manual tuning is useful when you already know the frequency of the desired station.
Note :
• When selecting the FM, if FM stereo broadcasts are poor because of weak broadcast signals, you can set the FM mode to
FM MONO to reduce the noise. (For details, refer to "Adjusting the channel level(/setting the FM mode)" on page 16.)