Fisher & Paykel CG755 - Manual (Page 10)

8
The appliance may be installed in a suitable room in accordance with the current laws in force.
The appliance is designed and approved for domestic use only and should not be installed in a
commercial, semi-commercial or communal environment.
Installing the appliance in any of the above environments will void the warranty and could affect
any third-party or public liability insurances you may have.
The appliance must be installed in compliance with regulations in force.
Installation technicians must comply with current laws in force concerning ventilation and the
evacuation of exhaust gases.
Always unplug the appliance before carrying out any maintenance operations or repairs.
The walls of the units around the appliance must not be higher than the benchtop and must be
capable of resisting temperatures of 105
o C above room temperature.
Do not install the appliance near flammable materials (eg curtains).
You must install a thermal protection barrier between the base of the appliance and the built-in
unit or an oven. See Fig. 1 below.
If the appliance is installed over a built-in oven, the oven should be fitted with a cooling fan and
the two appliances should be connected to the gas and electricity supply with independent
connections.
The thermal protection barrier must be:
removable
heat-resistant
made from low thermal conductivity material
at least 30 mm below the base of the cooktop
Fig. 1 Location of thermal protection barrier
Installation instructions
30
mm
Space for
connections
Clearance
Door
Thermal
protection
barrier