Fisher & Paykel CG755 - Manual (Page 14)

12
Installation instructions
Gas installation requirements
This appliance is adjusted at the factory for use on Natural gas.
To use it on LPG, it will first have to be converted. If the LPG conversion kit is not supplied with
the appliance, contact your nearest Authorised Service Centre.
Installation and service regulations (United Kingdom only)
Important!
This appliance must be installed and serviced only by a suitably qualified and registered person, and in
accordance with the current editions of the following standards and regulations or other locally applicable
regulations:
Gas Safety (Installation and Use) Regulations
Building Regulations
British Standards
Regulations for Electrical Installation
Failure to install the appliance correctly could invalidate any manufacturer’s warranty
and lead to prosecution under the above-quoted regulation.
Additional gas connection requirements (United Kingdom only)
We recommend connecting the appliance to the gas with a flexible hose made to BS5386.
Flexible hoses can be used where the sited ambient temperature of the hose will not exceed
70
o C. Any hose used must comply with BS 669, Part 1 and be of the correct construction for the
type of gas being used.
Flexible hoses designed for Natural gas MUST NOT be used for supplying LPG (LPG flexible hoses
can be identified by either a red band or strip on their outer coating).
Installation and service regulations (all countries)
Important!
This appliance must be installed and serviced only by a suitably qualified, registered installer
with technical knowledge of both gas installation and electricity. The installation or service must
comply with the current editions of the applicable standards, regulations, and codes of practice
governing gas and electrical installations.
Failure to install the appliance correctly could invalidate any manufacturer’s warranty.