Fisher & Paykel CG755 - Manual (Page 25)

23
Gas burners
The knob (Fig. 13) controls the flow of gas through the safety valve.
Using your cooktop
Fig.13 Burner knob
Never cook or leave the
knob between maximum
and O (off ).
You can choose to cook
at any heat between
minimum and maximum
OFF (closed valve)
Minimum
Maximum
Using the burners
1 Choose the knob for the burner you want to use.
2 Press the knob down gently and turn it anticlockwise to
the maximum position. The ignitors on all the burners will
spark.
3 Hold down the knob for approximately 10 seconds after
the burner has lit.
Releasing the knob too soon will extinguish the flame.
4 Adjust the flame anywhere between the maximum and
minimum positions. Do not adjust the flame between
maximum and O (OFF).
Note: If the burner does not light within 15 seconds, turn the
knob off and wait at least one minute before trying again.
5 After use, always turn the knobs to the O (OFF) position.
Flame failure safety feature
The burners have a flame failure probe as well as an ignitor (see Fig 15).
The flame failure probe cuts off the gas supply to the burner if the flame is blown out.
If the flames are accidentally extinguished, turn off the burner and do not try to light it again for
at least one minute (to allow the gas to disperse).
Fig. 14 Pressing down then
turning the burner knob
1
2