Fortress Technologies BreadCrumb Wireless Network - Manual (Page 32)

Chapter 5. Using BCAdmin™
Figure 5-5. Redundant Connection Example
Info Area
The Info Area shows detailed information specific to the currently selected BreadCrumb device, if any.
To select a BreadCrumb device in the Topology Area, single-click it with your mouse. The selected
BreadCrumb device will be highlighted with a dashed border.
The top portion of the Info Area shows a summary of the selected BreadCrumb device’s configuration as
pictured below:
Figure 5-6. BreadCrumb Summary Panel
In this example, you can see that the selected BreadCrumb device is running version 8.4 of the
BreadCrumb firmware, and has been running for a little over 18 minutes. It has two radios, on channels 8
and 11, both of which are participating in the mesh and serving as access points. You can also see the two
IPv4 addresses assigned to the radio cards, 10.217.208.1 and 10.217.207.1.
26