Fortress Technologies BreadCrumb Wireless Network - Manual (Page 34)

Chapter 5. Using BCAdmin™
configured, with configuration options grouped by tabs into multiple categories. Each tab and its settings
are described in this section.
General Settings
The "General" tab contains controls for configuring several simple system-wide settings:
Figure 5-8. BreadCrumb Properties - General Tab
The available settings are:
1. Name
This is a descriptive name used only for identification of the BreadCrumb device within BCAdmin.
Any changes to this name are immediately reflected on the screens of other BCAdmin users.
2. Type
This allows the administrator to note the type (model) of BreadCrumb. This is for administrator
convenience only and is ignored by BCAdmin.
3. Location
The Location field, if set, is displayed in the BreadCrumb box. It is not automatically updated by
GPS or other means; it is rather a place for administrators to put a short description of the
BreadCrumb device’s location for administrative convenience. For example, "rooftop,"
"commander’s vehicle," etc.
28