Fortress Technologies BreadCrumb Wireless Network - Manual (Page 36)

Chapter 5. Using BCAdmin™
Radio Settings
The "Radios" tab contains controls for configuring each of the BreadCrumb device’s 802.11b radio
radios:
Figure 5-9. BreadCrumb Properties - Radios Tab
The available settings for each radio are:
1. Channel
Channel selection may be automatic as described in the Section called Channel Assignments in
Chapter 4, or radios may be fixed to specific channels. If one radio is set to use automatic channel
selection, so must all of a BreadCrumb device’s other radios.
Important: If you are configuring an XL, XLV, or XLE, the radios must be set to channels 1 and 11,
respectively!
2. Mesh
If this checkbox is checked, the radio will participate in the BreadCrumb mesh.
3. Access Point
If this checkbox is checked, the radio will provide 802.11b Access Point functionality.
30