FARGO electronic CD Color Printer - Manual (Page 21)

18 Using the CD Color Printer with Windows
Windows 95 or Windows NT, click the Start button,
point to Settings, and select Printers. Then, click on the
CD Color Printer
icon with the right mouse button and
select Properties if using Windows 95 or Document
Defaults
if using Windows NT.
2. In Windows 3.1x, select the Setup button. In Windows 95,
click on the Details tab of the Properties window and
select the Setup button. In Windows NT, click on the
Advanced
tab of the Document Settings window.
NOTE Most applications allow you to change these same printer driver
options from their ÒPrintÓ and/or ÒPrinter SetupÓ screens. This
means that you donÕt have to go back to the main printer setup
window each time you want to change a setting or option in the
printer driver. These applications will usually give you the same
choices and options, but in a slightly altered format.
3. In Windows 3.1x and Windows 95, the CD Color Printer
setup screen appears. In Windows NT, the CD Color
Printer Document Settings appear. Change these options
according to the following descriptions.
Media
Click on the Media down arrow. A list of media selections
appears. Select the CD option if printing onto printable
CD-RÕs. Select Booklet if printing onto a jewel case booklet.
Select Insert if printing onto a jewel case insert. When sizing
your images for printing, keep in mind that each type of CD
media has the following maximum printable areas:
CD 4.56Ó round (116mm), Booklet 4.7Ó x 4.73Ó (119 x 120mm),
and Insert 4.63Ó x 5.97Ó (118 x 152mm). For a complete
description of each type of print media and to see how each is
installed, refer to Section 2.
510225 Fargo/CD Color Prtr 7/29/98 2:39 PM Page 18