FARGO electronic CD Color Printer - Manual (Page 26)

Using the CD Color Printer with Windows 23
Calibrate
Select this button to display options for fine-tuning the position
of your printed image and the size of a CD-RÕs non-printable
center.
When facing the printer, the Vertical adjustment moves the
printed image toward the printer if a positive number is entered
and away from the printer if a negative number is entered. The
Horizontal
adjustment moves the printed image toward the left-
hand side if a positive number is entered and toward the right-
hand side if a negative number is entered. The Center Size
adjustment enlarges the non-printable center if a positive
number is entered and reduces its size if a negative number is
entered. As a rule, an adjustment of 12 pixels is equivalent to
approximately 1 millimeter. Once you have entered the optimum
calibration values, you will most likely not need to change them
again. The following diagram illustrates exactly how each of
these adjustments affect the printed image.
HINT: Notice the direction the Vertical and Horizontal adjustment
arrows point within the Calibration window are representative of
the direction the printed image moves on the CD-R.
- Horizontal + Horizontal Center Size
Extended CD Tray
Printer
- Vertical
+ Vertical
510225 Fargo/CD Color Prtr 7/29/98 2:39 PM Page 23