FARGO electronic CD Color Printer - Manual (Page 37)

The Center Size adjustment enlarges the non-printable center if
a positive number is entered and reduces its size if a negative
number is entered. As a rule, an adjustment of 12 pixels is
equivalent to approximately 1 millimeter. Once you have
entered the optimum calibration values, you will most likely
not need to change them again. The following diagram
illustrates exactly how each of these adjustments affect the
printed image.
If you have just unboxed your new printer and are using it for
the first time, you should run a simple calibration procedure to
assure that your images will be centered when printed on a
CD. To calibrate your printer, refer to the following steps:
1. Verify that a cardboard CD template and a color ink
cartridge are installed in the printer. Also, verify that the
printer is powered ON and that it is connected to your
computer.
2. Click on the Test Print button of the Printing Position
Calibration window. The printer will begin printing the
calibration test print.
3. When the print is complete, rotate the cardboard CD
template 180¡ in the CD Tray and repeat step 2
using the same CD template.
34 Using the CD Color Printer with Macintosh
- Horizontal + Horizontal Center Size
Extended CD Tray
Printer
- Vertical
+ Vertical
510225 Fargo/CD Color Prtr 7/29/98 2:39 PM Page 34