Furuno ETR-30N - Manual (Page 31)

13
Note: The same IP address cannot be used when installing two ETR-30N or ETR-6/10N. To
change IP address and host name, set a different number (1-9) for each network
sounder with the HOST NAME switch on the ETR-30N. Note however that the
ETR-6/10N’s host name and IP address are “SOUNDER” and “172.31.92.1,”
respectively, and they cannot be changed.
HOST NAME control setting and resulting host name and IP address
HOST NAME
Control Setting
Host Name IP Address
0 (Default Setting) SOUNDER 172.31.92.1
1 SOUNDER1 172.31.92.11
2 SOUNDER2 172.31.92.12
3 SOUNDER3 172.31.92.13
4 SOUNDER4 172.31.92.14
5 SOUNDER5 172.31.92.15
6 SOUNDER6 172.31.92.16
7 SOUNDER7 172.31.92.17
8 SOUNDER8 172.31.92.18
9 SOUNDER9 172.31.92.19
NET KP
If installing two ETR-30Ns, connect cable MJ-A7SPF0002-050 between NET KP OUT/IN
ports to prevent interference. Maximum two ETR-30N units may be installed; however,
there are two ports. One is for future use.