FMI F48H(I)(R) - Manual (Page 15)

www.fmiproducts.com 122272-01D 15
installation
Continued
Figure 22 - Securing Door Rails to
Fireplace
Bottom Rail
(Use as a
Template before
Drilling)
Concrete
Screws
Top Rail
Drill Holes
into Bricks
Remove Screws
then Replace to
Secure Top Rail
Figure 21 - Installing Fireplace Screen
Ring
Screen
Push
On Nut
Screen
Rod
Bracket
Smoke Shelf
Screen
Rod
Fireplace Front
INSTALLING GLASS DOOR AND
RAIL
IMPORTANT: Install top and bot-
tom rails and hardware before
installing glass door panels.
IMPORTANT: This optional glass door kit can
NOT be used with your fireplace if you have
installed the optional Ash Lip Kit.
Rail installation
1. Remove screws securing top face to
firebox (see Figure 22).
2. Align holes on rail to be installed at top
and replace screws. Note: Door rails are
identical until spring clips are in place.
3. Using remaining door rail as a template,
place along front row of bricks at bottom
making sure rail front surface is flush with
fireplace bottom face surface. Mark hole
centers and remove rail (see Figure 22).
4. Drill 9 - 5/32" diameter holes about 1"
deep directly into bricks using a 5/32"
concrete drill bit (not provided).
5. Place rail back on bricks and align holes.
Secure using 9 concrete screws provided
with glass door kit.
6. Secure retaining clips to top and bottom
rails (see Figure 23).
Figure 23 - Mounting Door Retaining
Clips
Retaining
Clip
Top Rail
Bottom Rail