Friedrich CP24F30 - Manual (Page 14)

Starting Your Air Conditioner—Digital Control
1. Press POWER to turn on air conditioner.
NOTE: When the unit is turned on, it will display the previous
settings for the Mode, Fan Speed and temperature.
2. Choose mode. See “ Mode.”
3. Choose fan speed. See “ Fan Speed.”
4. Choose temperature. See “ Temperature.”
Mode
1. Press and hold MODE.
2.
Cool—Cools room. Press FAN SPEED to choose fan
speed. Then adjust the temperature by pressing the up or
down arrow buttons.
Fan—Operates the fan at High speed, without cool ing.
The display shows “ FO” (fan only).
Fan Speed
NOTE: The Fan Speed button will operate when the Cool,
Money
Saver or Fan Only mode has been selected.
1. Press the Fan Speed button until you see the indicator light
for the desired setting.
2. Choose Low, Medium or High.
Temperature
Press, or press and hold, the plus button to raise the
temperature 1º until it reaches 90ºF (32.2ºC).
Press, or press and hold, the minus button to lower the
temperature 1º until it reaches 60ºF (15.5ºC).
Timer Delay
To set the Timer for a 1- to 24-hour delay until the air
conditioner turns off (the air conditioner must be On):
1. Press TIMER. Indicator light will flash.
2. Press the plus or minus button to change the delay time from
1 to 24 hours.
3. Press TIMER or wait 10 seconds. Indicator light will remain
on.
To set the Timer delay for a 1- to 24-hour delay until the air
conditioner turns on, keeping previous settings:
1. Turn off air conditioner.
2. Press TIMER. Indicator light will flash.
3. Press the plus or minus button to change the delay time from
1 to 24 hours.
4. Press TIMER or wait 10 seconds. Indicator light will remain
on.
To set the Timer delay for a 1- to 24-hour delay until the air
conditioner turns on, changing previous settings:
1. Turn on air conditioner.
2. Adjust MODE to desired setting.
3. Adjust FAN SPEED to Low, Medium or High.
4. Adjust temperature between 60ºF (15.5ºC) and 90ºF (32.2ºC).
5. Turn off air conditioner.
6. Press TIMER. Indicator light will flash.
7. Press the plus or minus button to ch ange delay time from 1 to
24 hours.
8. Press TIMER or wait 10 seconds.
To clear Timer delay program
NOTE: Air conditioner can be either on or off.
Press TIMER. Indicator light will turn off.
POWER
Temp/Hour
Timer
Fan Speed
Fan Only
Cool
Money
Saver
®
High
Med
Low
0 F
Mode
Hr.
Auto Swing
Temp/Hour
0 F
Hr.
Timer
Money Saver — Cycles fan with compressor when
room temperature reaches the temperature setting
on the thermostat.
Fan Only
Cool
Mode Money
Saver
®
Fan Speed
High
Med
Low
POWER
Money Saver
®
Choose Cool or Fan mode
12