Recommended grounding method, Power supply cord – Friedrich CP24F30 User Manual

Page 7

Advertising
background image

Recommended grounding method

This air conditioner must be grounded. This air conditioner is
equipped with a power supply cord having a grounded 3 prong
plug. To minimize possible shock hazard, the cord must be
plugged into a mating, grounded 3 prong outlet, grounded in
accordance with all local cod es and ordinances. If a mating outlet
is not available, it is the customer' s responsibility to have a
properly grounded 3 prong outlet installed by a qualified electrical
component installer.

It is the customer' s responsibility:

To contact a qualified electrical installer, and

To assure that the electrical installation is adequate and in
conformance with National Electrical Code, ANSI/NFPA 70 -
latest edition, and all local cod es and ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association
One Batterymarch Park
Quincy, MA 02269

Power Supply Cord

NOTE: Your unit’s device may differ from the ones shown.

This room air conditioner is equipped with a power supply cord
required by UL. This pow er supply cord contains state-of-t he-art
electronics that sense leakage current. If the cord is crushed, the
electronics detect leakage current and pow er will be
disconnected in a fraction of a second.

To test your power supply cord:

1. Plug power supply cord into a grounded 3 prong outlet.

2. Press RESET.

3. Press TEST (listen for click; Reset button will trip and pop

out).

4. Press and release RESET (listen for click; Reset button will

latch and remain in). The power supply cord

is ready for

operation.

NOTES:

The Reset button must be pushed in for proper operation.

The power supply cord must be replaced if it fails to trip when
the test button is pressed or if it fails to reset.

Do not use the power supply cord as an off/on switch. The
pow er supply cord is designed as a protective device.

A damaged power supply cord must be replaced with a new
power supply cord obt ained from the product manufacturer
and must not be repaired.

The pow er supply cord contains no user serviceable parts.
Opening the tamper-resistant case voids all warranty and
performance claims.

A. Reset button
B. Test button

TEST

TEST

RESET

RESET

A

A

B

B

5

Advertising
This manual is related to the following products: