Fujioh FSR-3000 - Manual (Page 10)

2. RANGE HOOD MOUNTING
1 Referring to “SIZE & DIMENSIONS”,
insert 4 washer head wood screws into
the bottom plate of the cabinet. Marking
before screwing is recommended. Allow
about ¼" between the bottom plate and
screwheads for hanging the hood body.
2 With inserting the duct joint into the duct
end, hook the temporary fixing holes of
the body on the screws, then slide the
body backward until the screws are
engaged in narrow end of the holes.
3 After ensuring that the range hood is
positioned properly, tighten the 4 screws
and fix it firmly using 2 more washer
head wood screws.
4 Make the duct joint secure and air tight
using non-flammable tape such as duct
tape, etc. (not supplied)
Fixing Screws
Duct Tape, etc.
Duct
11