Fujioh FSR-3000 - Manual (Page 6)

1. PREPARATION
1 This range hood can discharge upward
or backward. According to the conditions
where the hood is installed, determine
whether it will discharge vertically (3¼"
×
10" or 7" Round) or horizontally (3¼"
×
10" only). For vertical or horizontal
discharge, run duct work between the
hood location and a roof cap or wall cap.
For the best results in either directions,
use a minimum number of transitions
and elbows. Be sure to attach a roof cap
or wall cap to avoid leaking rain in the
end.
2 Use diagrams below, for proper placement of ductwork and electrical cutout in
cabinet or wall.
INSTALLATION
WARNING : • If the range hood is not installed properly, it could become
detached and fall off.
• Ensure that the metal duct does not touch other metal
housing materials, otherwise fire or electric shock could result.
;
3¼"
ЧЧЧЧЧ
10" Vertical Ducting
7