Fujioh FSR-3000 - Manual (Page 8)

3 Run house wiring between service panel and hood location.
4 Prepare the range hood.
(1) Remove the 7" round duct joint on the
top plate of the body by removing
2 fixing screws.
Note: Keep the screws for reusing later.
(2) Remove the Rectifier Baffle Panel by
loosening the screws, and dislocating
its temporary fixing holes from the screws.
Note: Use a screwdriver if they are tight.
(3) Remove the fan case cover by removing
4 screws.
9
7" Round
Duct Joint
Rectifier Baffle Panel
Fan Case Cover