Fisher PLC-WXU10N - Manual (Page 15)

EN-14
Remote Control
1 ON / STAND-BY
Refer to “Powering On/Off the Projector”.
2 Four directional (INPUT/AUTO PC)
buttons
- Use four directional buttons to select items
or make adjustments to your selection.
- Manually selects an input source. (Left
button)
- Automatically adjusts Fine Sync and
Total Dots. This function is available
for computer mode only. (Right button)
3 MENU
Displays or exits the on-screen display menus.
4 LIGHT
Press and hold this button to activate the
LED light. If you press and hold the
LIGHT button continuously or frequently,
the batteries may terminate the life in a
shorter period.
5 MUTE
Cuts off the sound temporarily. Press
again to cancel the MUTE function.
6 AUTO PC
Automatically adjusts Fine Sync and
Total Dots. This function is available for
computer mode only.
7 NO SHOW
Cuts off the screen temporarily. Press
again to cancel the NO SHOW function.
8 ASPECT
Switch the image aspect ratio.
9 INPUT
Manually selects an input source.
10 KEYSTONE + / -
Adjusts image distortion caused by tilting
the projector.
11 VOLUME + / -
Press Volume + button to increase
the volume.
Press Volume - button to reduce the
volume.
12 FREEZE
Press “FREEZE” to pause the screen image.
Press again to cancel the FREEZE function.