Fisher PLC-WXU10N - Manual (Page 37)

EN-36
Appendix
LED Indicator Messages
Projector
Status
Standby
Lamp waiting
Lamp on
Lamp ignition
failure
Fan lock
Over
Temperature
Over
temperature
(Filter)
Cooling
Lamp
Replacement
LED Type
Power LED Lamp LED
Color Status Color Status
Meaning
Green
Green
Green
Green
Amber
Green
-
Green
Green
Green
Flashing
On
On
On
On
On
-
On
On
On
-
-
Green
Red
Green
Green /
Amber
-
Green /
Amber
Green
Green /
Red
Off
Off
On
Flashing
On
Flashing
-
Flashing
Flashing
Flashing
The projector is powered and ready.
Preparing lamp ignition.
The lamp is in good condition.
The lamp ignition failed at turning on.
The lamp ignition failed during normal
operation.
Fan locked. The lamp will turn off.
Temperature is too high.
The lamp will turn off and the fan will
spend a while to cool the system.
Temperature is too high. Please clean up
the filter. OSD shows “Please clean up filter”.
Temperature is too high. Please clean
up the filter. System will power down
and spend a while to cool the system.
OSD shows “Warning! PJ temperature
is too high.”
Cooling the system.
The lamp draws to an end. Please replace
the lamp with a new one promptly.
Optional Parts
The parts listed below are optionally available. When ordering those parts, give the item
name and Model No. to the sales dealer.
Q
COMPONENT-VGA Cable : POA-CA-COMPVGA
Q
RS232C cable : POA-MCSRL02