Fisher PLC-WXU10N - Manual (Page 4)

EN-3
Safety Instructions
All the safety and operating instructions
should be read before the product is operated.
Read all of the instructions given here and
retain them for later use. Unplug this
projector from AC power supply before
cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked
on the projector.
For added protection to the projector during
a l i g h t n i n g s t o r m , o r w h e n i t i s l e f t
unattended and unused for long periods of
time, unplug it from the wall outlet. This
will prevent damage due to lightning and
power line surges.
Do not expose this unit to rain or use near
water... for example, in a wet basement, near
a swimming pool, etc...
Do not use attachments not recommended by
the manufacturer as they may cause hazards.
Do not place this projector on an unstable
cart, stand, or table. The projector may fall,
causing serious injury to a child or adult, and
serious damage to the projector. Use only
with a cart or stand recommended by the
manufacturer, or sold with the projector. Wall
or shelf mounting should follow the
manufacturer's instructions, and should use a
mounting kit approved by the manufacturers.
A n ap p l i an c e an d c a r t
combination should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the appliance and cart
combination to overturn.
Slots and openings in the back and bottom
of the cabinet are provided for ventilation,
to ensure reliable operation of the equipment
and to protect it from overheating.
The openings should never be covered with
cloth or other materials, and the bottom
opening should not be blocked by placing the
projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed
near or over a radiator or heat register.
This projector should not be placed in a
built-in installation such as a book case
unless proper ventilation is provided.
Never push objects of any kind into this
projector through cabinet slots as they may
touch dangerous voltage points or short out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation
duct of air-conditioning equipment.
This projector should be operated only from
the type of power source indicated on the
marking label. If you are not sure of the
type of power supplied, consult your
authorized dealer or local power company.
Do not overload wall outlets and extension
cords as this can result in fire or electric
shock. Do not allow anything to rest on the
power cord. Do not locate this projector
where the cord may be damaged by persons
walking on it.
Do not attempt to service this projector
yourself as opening or removing covers may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified
service personnel.
Unplug this projector from wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a. When the power cord or plug is damaged
or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain
or water.
d. If the projector does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore
the projector to normal operation.
e. If the projector has been dropped or the
cabinet has been damaged.
f. When the projector exhibits a distinct
change in performance-this indicates a
need for service.
When replacement parts are required, be
sure the service technician has used
r e p l a c e m e n t p a r t s s p e c i f i e d b y t h e
m a n u f ac t u r e r t h a t h a v e t h e s am e
c h a r ac t e r i s t i c s as t h e o r i g i n a l p a r t .
Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to
this projector, ask the service technician to
perform routine safety checks to determine
that the projector is in safe operating condition.