FieldServer FS-RA-CLX-PRO - Manual (Page 11)

SlotServer Start-Up Guide Page 11 of 12
ProSoft Technology, Inc. is the exclusive provider of FieldServer SlotServers.
For Technical Support call +1 661.716.5100
Appendix C. Vendor Information
Appendix C.1. Installing SlotServer on a Remote Rack using CNB Cards 1
Appendix C.1.1. Hardware and Software requirements

Two 1756 racks, one containing the CPU and the other the SlotServer

Two Controlnet CNB cards with connection cables to connect the racks to one other

RSlinx

RSLogix

RSNetworx

SlotServer EDS file (Available on SlotServer CD, or call Technical Support)
Appendix C.1.2. Setup

Install the CPU and the first CNB card in the local rack.

Install the second CNB card and the SlotServer in the remote rack.

Connect the ControlNet Network

Power up the racks

Install the SlotServer EDS File using the RSLinx Hardware EDS Installation Tool.

Make sure the SlotServer has a valid configuration loaded. The default configuration shipped with the
SlotServer should suffice.
Refer to the SlotServer Configuration Manual for further information.
Note: When configured in remote rack applications, the SlotServer does not support the use of EN2T-A cards, but
is compatible with EN2T-B cards.
1
The principles for connecting other 1756 bridging cards to the SlotServer are similar.