FieldServer FS-RA-CLX-PRO - Manual (Page 3)

SlotServer Start-Up Guide Page 3 of 12
ProSoft Technology, Inc. is the exclusive provider of FieldServer SlotServers.
For Technical Support call +1 661.716.5100
1 EQUIPMENT SET-UP
1.1 Supplied equipment
USB Flash Drive loaded with:

SlotServer Start-up Guide

SlotServer Configuration Manual

FieldServer Utilities Manual

All FieldServer Driver Supplements

Support Utilities

Any additional folders related to special files configured for a specific FieldServer

Additional components as required - See Driver Manual Supplement for details
Accessories:

2-way combi-comb connector for LonWorks port

7-ft Cat5 cable with RJ45 connectors at both ends (Part # FS-8915-10)
1.2 Third Party Components (Not Supplied by FieldServer Technolo gies)
The following components will need to be procured as a minimum for achieving ControlLogix integration. Ensure
that these are available before commencing with commissioning
Part # Description
1756-Ax ControlLogix Rack
1756-L55/L61 ControlLogix CPU
1756-PA7x ControlLogix PSU
9324-RLD300ENE RSLOGIX 5000
1.3 Mounting
The SlotServer plugs directly into the AB1756 ControlLogix rack. Take note of the slot number used for the
SlotServer as this will be needed when configuring the I/O in the RSLogix software.