FUJITSU MAG3091FC - Manual (Page 10)

C141-E078-02EN ix
Work division Precaution Page
Data loss
When the SEND DIAGNOSTIC command terminates with the CHECK
CONDITION status, the INIT must collect the error information using
the REQUEST SENSE command. The RECEIVE DIAGNOSTIC
RESULTS command cannot read out the error information detected in
the self-diagnostics.
6-4
Damage
Do not open the DE in the field because it is completely sealed.
6-5
Data loss
Save data stored on the disk drive before requesting repair. Fujitsu does
not assume responsibility if data is destroyed during servicing or repair.
6-6