FUJITSU MAG3091FC - Manual (Page 51)

C141-E078-02EN 4 - 4
4.1.2 Mounting
The permissible orientations of the IDD are shown in Figure 4.3, and the tolerance of the angle is
±
5° from the horizontal plane.
Figure 4.3 IDD orientation
4.1.3 Notes on mounting
(1) Mounting frame structure
Special attention must be given to mount the IDD disk enclosure (DE) as follows:
Direction of
gravity
(a) Horizontal –1 (b) Horizontal –2 (c) Vertical –1
(d) Vertical –2 (e) Upright mounting –1 (f) Upright mounting –2